Comments Off on How To Make An Acme Thread

How To Make An Acme Thread

An acmethread gauge offers a tight hold and grip that you can rely on. It is possible to make your own acmethread with the innovative trapezoidal design element. However, there are some tools you will need and steps that you must follow.

Tools Required

  • Standard Pitch Gauge
  • 8 inch steel Piece
  • Lathe Machine
  • Bench Grinder
  • Sharpening Stone

Grinding The Acmethread

You should start with a standard cuter that is about 60 degrees. You simply begin by grinding at a 4 degree angle, but be sure to keep the work and wheel center together. You then move up 14.5 degrees and grind until you have created the right shape. Once you have the correct shape, you simply work to refine it until the ideal 29 degree angle is maintained. The 29 degree angle is very important and one of eth main characteristics of eth acmethread. You can check your work by looking for gaps in between the cutter and the gauge. Work diligently with the grinder, but do not work at fast speed. It will only result in mistakes to the acmethread.

Lathe Machine And The Acme Thread

When constructing the acmethread, you also have to use the lathe machine. This is done by creating a .5 inch divot in the chuck. However, it is important to make sure that it is in the end. This piece should them be extended about 7 inches and you can make more adjustments with the tool leveler. The next part involves creating the exact angle that you need. Now you simply perform normal threading, which involves running it back and moving it forward. You should then select the exact length that you want your acmethread to be. Simply repeat the process until you achieve the depth you are looking for. This will enable you to create the ideal acmethread.

Tips To Remember

When making an acmethread it is important to remember that the spring on the lathe will move often. Simply correct the error and keep going forward. This will ensure that the shape and design of eth acmethread is optimal. Constructing an acme thread is a complex process, but it can be made easier by following the steps accurately. The unique design of an acmethread makes this screw option the best choice for a secure hold. However, the unique design structure makes it tricky to construct on your own.